[. . . ] Operation Manual WWW. BRITEQ-LIGHTING. COM Copyright © 2008 by BEGLEC cva. Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. V1. 0 ENGLISH OPERATION MANUAL ENGLISH OPERATION MANUAL SWIVEL CLAMP 502 OPERATION MANUAL Thank you for buying this BriTeQ product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. ® The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. [. . . ] Service life: 500kg 48mm to 51mm 24, 5cm (total height) x 11cm x 5cm +/-1, 24kg 10 years BEFORE USE Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. If you sell the fixture, be sure to add this user manual. Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. briteq-lighting. com SAFETY INSTRUCTIONS: To protect the environment, please try to recycle the packing material as much as possible. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. Always use an additional appropriate and certified safety cable when installing a device. Due to safety reasons it is prohibited to make unauthorized modifications to the clamps. Refer to the maximum load at the last page of this manual, this load must never be exceeded!These clamps may only be installed in vertical position with the M8 bolt and wing nut facing down. Never exceed the maximum service life of the clamps. OVERHEAD RIGGING Important: The installation must be carried out by qualified service personal only. [. . . ] Always use a certified safety cable that can hold 12times the weight of the device when installing it. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the clamp fails. BriTeQ® 1/2 SWIVEL CLAMP 502 BriTeQ® 2/2 SWIVEL CLAMP 502 [. . . ]